1. Cleaning methods that meet the standards
According to international standards such as EN ISO 20471:2013, compliant reflective vests can be washed as long as the corresponding washing requirements are followed.
2. Recommended washing steps
Use a neutral detergent and avoid strong acids, alkalis, or bleaches.
Hand washing is preferred. If using a washing machine, put the vest in a laundry bag and select the gentle cycle.
Control the water temperature below 30 °C to prevent the reflective material from deforming due to high temperatures.
3. Drying and post treatment
After washing, hang the vest to dry naturally. Avoid direct sunlight and using a dryer.
Do not iron the vest to prevent damage to the reflective film layer.
4. Label instructions
Refer to the product label or the accompanying instruction manual for the specific washing method to ensure that the operation complies with the manufacturer's recommendations.
Will the reflective effect decrease after washing?
1. Experimental data on performance maintenance
The standard stipulates that reflective vests must still meet the reflective performance requirements after at least 25 washes, indicating that proper washing will not significantly reduce their visibility.
2. Influencing factors
Improper use of strong alkalis, bleaches, or high temperature drying will accelerate the aging of the reflective material, leading to a decrease in the reflective effect.
Long term exposure to strong light, chemical corrosion, or mechanical wear environments will also gradually weaken the reflective performance.
3. Maintenance suggestions
Use a mild detergent according to the label instructions and control the number of washes.
Regularly check whether the reflective strips are peeling off, scratched, or fading in color, and replace them in time if necessary.
4. Replacement cycle
Even if the vest looks intact, it is recommended to replace it every two years to ensure that the optical performance of the reflective material always meets the safety requirements.
It is focused on the overall solution of dry bulk material port transfer system,
research and development,
manufacturing, and service
Contact Us
Contact UsMiss. Jenny
+86 136 5588 7720
sales8@hoyoungsafety.com
sales1@hoyoungsafety.com